A CLEARER PICTURE OF YOUR SETUP

Watch the full squeeze and release.

Observe standard-mapped LT/L2 and RT/R2 values as you squeeze and release. Check raw inputs when a device exposes triggers differently.

✓Free to use✓No sign-up✓On your device

Meet your controller.

A little movement tells you a lot.
Waiting for controller
⌁
No controller detected yet
Connect by USB or Bluetooth, then press a button
ABXY
Input detectedAt rest
Generic standard layout

Every key has a say.

Click here, then press letters or numbers. Tested keys stay highlighted. Your keystrokes stay in this tab.

Make every click count.

Click inside the test area. This preview counts left, middle and right button presses; it does not measure hardware latency.

Left 0 · Middle 0 · Right 0Click here to test

A clean look at your screen.

Cycle through solid colors to inspect your display visually. Click to change color; press Escape to exit. This is not a calibration tool.

1
Buttons & triggers

Press each button and slowly squeeze both triggers.

Show numbered raw inputs
No controller detected.
No installs. No account. Just your browser.
Made for standard gamepad inputs. Available readings depend on your controller, browser and connection.No input data is uploaded.

How to use this check

Use a gradual squeeze

With a standard-mapped controller, the bars use browser button values 6 and 7 for LT/L2 and RT/R2. Release a trigger, squeeze it gradually and watch whether its reported value changes. Take note of any abrupt transition and repeat the movement at a slower pace.

Analog is not guaranteed

Some controllers expose digital triggers, use axes instead, or change behavior with their connection or input mode. A value that jumps directly from 0 to 1 does not by itself establish a fault. For non-standard mappings, the page labels these bars as numbered inputs.

Keep comparisons consistent

Trigger locks, firmware profiles and drivers can change the visible range. Use the same settings when comparing reports. InputHarbor does not change trigger limits, calibrate a controller or certify the mechanical travel of a physical trigger.

Readings reflect what your browser exposes. Compatibility and mapping must be checked on each device. Read our measurement method and limitations.